Follow

How to Connect to Wifi

The PhotoSpring frame needs a wifi connection in order to 

- Receive photos and videos

- Update to the latest software when available

 

To connect to Wifi you first need to have your Wifi router name and password.

Step 1: Open the Wifi Settings Screen

There are two ways to access the Wifi Settings Screen

Access through the Menu Button

The menu button is in the upper right corner of the screen and can be accessed from the Playlist Screen or the Photo Info Screen.

Access through the Wifi signal strength indicator 

The Wifi signal strength indicator is in the lower right corner of the screen and can be accessed from the Playlist Screen or the Photo Info Screen.

 

Step 2: Connect to WiFi

Tap your wifi network from the list that appears. Enter your password if necessary. If successful you will see a blue dot next to the network you are connected to. The network will also be in bold. Tap Done when finished.

Screen_Shot_2017-08-16_at_3.58.19_PM.png

Note: earlier versions of the frame do not support WEP HEX based security. If you have a WiFi SSID set to WEP, its probably better you set it to a more secure WPA based security. If this is not possible, then do your frame setup on another wifi network. The frame will receive an update that fixes this issue and allows it to work on WEP HEX based wifi networks.

 

 

 

0 Comments

Please sign in to leave a comment.
Powered by Zendesk