Frame Settings: Device Settings Screen

Use the Settings screen to get to the Device Settings Screen.

The Settings screen can be accessed from the upper right corner of either the Photo Info Screen, or the Playlist Screen by tapping on the menu button Screen_Shot_2017-08-14_at_4.14.32_PM.png and selecting Settings from the Menu that appears. Screen_Shot_2017-08-16_at_11.34.01_AM.png


Once in the Settings Screen you will see a set of buttons just under the frame name. See below:


Tap Device to get to the Device Settings Screen:




From the Device Settings screen you can:

Screen_Shot_2017-08-16_at_11.54.54_AM.png Back Button: Tap to go back to the Slideshow screen.
Screen_Shot_2018-07-03_at_10.13.50_AM.png Settings Tabs: Tap to go to other settings screens.
Screen_Shot_2017-08-16_at_11.55.24_AM.png Brightness: Tap the + and - buttons to change the brightness.
Screen_Shot_2017-08-16_at_11.55.28_AM.png Volume: Tap the + and - buttons to change the volume
Screen_Shot_2018-07-03_at_10.47.56_AM.png Mute: Turn off the speaker
Screen_Shot_2018-07-03_at_10.54.09_AM.png Airplane Mode: Switch this on to turn off signals from the frame. Required when using the device on an airplane.
Screen_Shot_2018-07-03_at_10.54.17_AM.png Power Save Mode: Turn this switch on to automatically save power. When battery goes below 20% the frame will turn off any power intensive tasks like networking until AC power is restored.
Screen_Shot_2017-08-16_at_11.55.50_AM.png Reset Device Button: Tap to reset the device. This will delete all photos and videos. You will have to go through setup again.
Screen_Shot_2017-08-16_at_11.55.54_AM.png Report a Bug Button: Tap to report a bug. We will receive the bug and respond via email during normal working hours.
Screen_Shot_2017-08-16_at_11.56.00_AM.png Time: Tap to change the time/date
Screen_Shot_2017-08-16_at_11.56.05_AM.png Battery Level: View the current battery level. Four bars is 100%. A flashing set of bars means the device is charging.
Screen_Shot_2017-08-16_at_11.56.10_AM.png Wifi Level: View the current WiFi signal strength. Tap to change wifi settings.



Other screens:



Please sign in to leave a comment.
Powered by Zendesk